Krypton Installation Guide

 

Thank you for choosing Krypton by FeyziLogic for your home privacy and security needs. In this document we will provide you with the simple 3-step instructions on how to set-up your Krypton device.

 

If you have any questions or concerns please feel free to reach out to us. You may call us at 1-262-TALK2FL or email us at hi@feyzilogic.com

 

Locate your modem and your router devices at your home. Unplug the device(s) from the power outlet. This will interrupt your Internet service during the installation of Krypton.

 

If you have one device that acts as both your modem and router (combo) please use install guide 1.

 

If you have separate modem and router devices, please use install guide 2.

 

If you rent your device from your Internet service provider (AT&T, Comcast, Charter, etc) you may have one device that acts as both your modem and router.  You will see some examples of these devices below.








 






 





 

 

 
INSTALL GUIDE 1 - For Modem/Router Combo
 

 

  1. Locate the cord marked with the number 1 (black) on your Krypton device. Plug this cord into the back of your modem/router device, into the Ethernet slot. The back of your device could have several slots. You may plug the Krypton cord number 1 into any one of the similar slots shown below. Continue to step 2.






















     

  2. Locate the new router you were provided and plug Krypton cord number 2 (white) into the back of this device, into the slot similar to the one shown below. After you complete this step continue to step 3.



















     

  3. Plug the power cords for your modem (old device), new router, and Krypton device into power outlets.  Once the devices are all booted, which can take up to 5 minutes, your new router will provide you with a new Wi-Fi network in your home. The name and password for this new Wi-Fi may be found on the new router device. This new Wi-Fi network will have all of the services provided by Krypton. Begin connecting all of your smart devices to this new Wi-Fi. Although you may continue to use your old Wi-Fi, be aware that it will not be protected by Krypton.

 
INSTALL GUIDE 2 - For Separate Modem/Router Setup

 

  1. Locate the cord marked with the number 1 (black) on your Krypton device. Plug this cord into the back of your modem device. The back of your modem will have one slot marked as Ethernet. Plug the Krypton cord marked as number 1 into this slot. Continue to step 2.






















     

  2. Locate your router and plug Krypton cord number 2 (white) into the back of this device into the slot similar to the one shown below. This port is usually marked WAN or the Internet and has a different color scheme. After you complete this step continue to step 3.


















     

  3. Plug the cord for your old devices and new Krypton device into power outlets. Once your devices are booted which typically takes 5 minutes, you’re all done. Your devices are all now protected by Krypton. No need to do anything else.

 

© 2018 by FeyziLogic